Description
Launch X-431 IMMO Pad All-In-One Car Diagnostic Key Programming Tool
Launch X-431 IMMO PAD is based on the Android 7.1 platform and is equipped with an octa-core 2.0GHz processor, 4GB of memory and 64GB of storage. Its 10.1-inch full-fitting sunlight-readable Gorilla Glass screen boasts a vibrant 1920 x 1200 resolution. The tablet is IP65-rated water- and dust-resistant, with a dual-band Wi-Fi architecture providing a more reliable tool-to-VCI connection. The upgraded all-in-one Smartlink VCI supports CAN, CANFD, DoIP, J2534, D-PDU, RP1210 and Smartlink remote service, which enables the capability of ECU coding and programming that are required usually after immobilizer replacement. The upgraded Launch X-Prog 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code.
Launch X431 IMMO PAD Hightlights:
1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for fifth-generation Audi (0AW/0B5) gearboxes.
4. Supports reading, writing & cloning of the ECU for fourth-generation VW UDS engines.
5. Supports BMW E chassis 8HP gearbox ECU program wiping.
6. Support Mercedes(Engine, Gearbox, EIS) and BMW(Gearbox) ECU anti-theft data erase.
7. Supports 170+ Bosch, 10+ Siemens engine ECU and 18+ gearbox ECU BENCH mode clone.
– Bosch engine ECU: ME17，MED17，EDC17，MEVD17, etc.
– Siemens engine ECU: BMW(MSV90, MSD87, MSD85,MSD81, MSD80), Mercedes(SIM271DE2.0,SIM271KE2.0), VW/Audi(SIMOS8.6x,SIMOS8.5x,SIMOS8.4x), etc.
– Gearbox ECU: DQ200-MQB, DQ250XX, DL501 Gen1,VL381,VGS2- FCVT,VGS-FDCT,DQ400E,DL501 Gen2,DL382-7F,VGS2-FDCT,9G_Tronic,DQ380,DQ381, DQ500,AL551,AL450,AL552,AL951,8HPXX, etc.
Launch X431 IMMO PAD Functions:
Intelligent Diagnostic Function:
1. All systems OE-Level diagnostics for over 110 vehicle models.
2. Exceptional full functionality includes comprehensive OBD II diagnostics, bi-directional control, ECU coding & programming, etc.
3. Support CAN/CANFD/DoIP communication protocols and J2534/D-PDU/RP1210 communication standards.
4. Exclusive Smartlink remote diagnosis.
5. 25 advanced service functions.
6. Pre-scan and post-scan diagnostic report.
7. Expand diagnostic coverage via “Mall”.
8. Optional ADAS calibration function with the X-431 ADAS calibration tools.
9. Optional TPMS function with X-431 TSGUN.
Key Programming Function:
1. Supports key matching/copying, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Anti-theft modules replacement: Support anti-theft modules replacement of BMW, Mercedes-Benz, VW/Audi, Honda, Nissan, Hyundai, Kia, BYD, Changan, Wuling Baojun, GAC, SAIC Maxus, Great Wall Motor, Chery Car, Dongfeng Fengxing, JAC Passenger Car, etc
3. Anti-theft password reading:Supports the anti-theft password reading of Peugeot Citroen, GM, Nissan, Hyundai, Kia, Chery Cars, Dongfeng Fengxing, JAC Passenger Cars, etc.
4. Key Matching: Support key matching of Ford, GM, Mercedes-Benz, BMW, VW/Audi, Porsche, Peugeot Citroen, Land Rover Jaguar, Honda, Toyota, Nissan, Hyundai, Kia, BYD, Changan Automobile, Wuling Baojun, Great Wall Motors, Chery Cars, JAC Passenger Cars, etc.
Launch X-431 IMMO PAD Tablet Specification:
| Processor | 2.0GHz, Octa-Core |
| Operation System | Android 7.1 |
| Memory | 4GB |
| Storage | 64GB |
| Battery | 9360mAh |
| Display | 10.1”, 1920*1200 |
| Camera | Front 8MP, Rear 13MP |
| Protection | IP65 |
| WIFI | 2.4GHz/5GHz |
| Interface | TYPE A *1 & TYPE C*1 |
| Working Temperature | 0~50℃ |
| Dimension | 320 x 211 x 46mm |
Smartlink C VCI Specification:
| Display | 3.97“ single-touch screen, 320*480 |
| Memory | 256MB |
| Storage | 8GB |
| Remote Communication | WIFI / Ethernet |
| Working Voltage | DC 9V – 36V |
| USB | Type B USB2.0 |
| Power Consumption | <6W |
| Work Temperature | 0~50℃ |
| Dimension | 204 x 110 x 45mm |
Launch X-PROG 3 Specification:
| Interface | DB26, DB15 |
| Input Voltage | DC12V |
| Input Current | 500mA |
| Working Temperature | 0~50℃ |
| Storage Temperature | -20~70℃ |
| Vehicle Key Slot | To place car key for RF defection |
| DB26 | Used to connect to each anti-theft cables |
| Infrared slot for Benz key | Used to place the Mercedes-Benz infrared key to perform the key matching function |
| Key IC hole | Used to place the key chip to perform the key matching function |
| Status Indicator | Power supply indicator lamp |
| DIY Slot | Used to connect the anti-theft ECU pin through the cable to read and write data |
| Locker | To tighten loose EEPROM board |
| DC 12V | Used to connect to the DC12 power supply |
| DB15 | To connect with vehicle’s DLC |
| EEPROM Slot | To insert EEPROM board |
Launch X431 IMMO Pad Package:
1. Launch X431 IMMO Pad Tablet
2. Smartlink C VCI
3. X-Prog 3
4. User Manual
5. Other Parts
