Description
- 2024 NEWEST, UPGRADED OF G-BOX2: Autel G-BOX3 Accessory Tool is upgraded from GBOX2, newly adds Engine ECU reading/writing for B~OSCH MD1/MG1(For VAG, BMW, PSA, OPEL, etc.). It also can program keys for Mercedes DAS3 CAN EIS/EXS in an ALL-Keys-Lost situation.
- WIDELY COMPATIBLE W/ AUTEL IM SERIES: Autel GBOX 3 Key Programming Adapter can work with Autel IM508/ IM508S/ IM508 PRO+XP400 and MaxiIM IM608, IM608 Pro, IM608S II, IM608 PRO 2, KM100, Auro IM600 and Auro IM100 with XP400.
- REDUCE READING TIME: Reduce the data reading time of ECU W204 and EIS W207 by more than 85%; It is not necessary to remove and reinsert the key for W221 and W164 after the 2009 models.
- 8X FASTER READING FOR BMW: Gbox3 can read 8X faster, it is better to work on BMW .The G-Box3 also supports DME/DDE ISN Reading and Writing in Boot Mode on applicable B~MW vehicles.
- MORE YOU NEED: Autel G-BOX 3 work on B~MW DME/DDE ISN reading for 20 types (EDC17, MEVD17, MSV90, MSD87, etc.); For VAG ECM IMMO data reading & data synchronization for 18 types (MQB EDC17, MED17, etc.); It can be used in Boot Mode or Bench Method.
- MaxiIM Key Programming Tablet Accessory, compatible with IM608 and IM508 (with Xp400pro purchase)
- Mercedes-Benz All Keys Lost, Faster Password Calculation
- Mercedes-Benz All Keys Lost, eliminates repeated Insertions within the process
- Mercedes-Benz All Keys Lost, Can Be Programmed on the Vehicle Without Removing the Electronic Ignition Switch (EIS)
- BMW DME/DDE ISN Reading and Writing in Boot Mode or Bench Method
- Contains All Connections Including Cables, Fuse Connector, and CAN Line Connectors
